• <menu id="weoww"></menu>
  • <dd id="weoww"><optgroup id="weoww"></optgroup></dd>
    <menu id="weoww"></menu>
    <menu id="weoww"></menu>
  • 濟南誠耐

    濟南誠耐金屬制品有限公司

    不斷發展技術力量、完善的設計服務團隊,真誠為您提供的服務

    全國咨詢熱線
    于經理15194166167
    15990909037

    聯系我們

    企業名稱:濟南誠耐金屬制品有限公司

    聯系人:于經理

    電話: 15990909037

    電話: 15194166167

    地址:山東省濟南市歷城區小清河南路8288號

    當前位置:首頁 »資訊中心 » 常見問題 » 不銹鋼裝飾線條的施工要注意什么?

    不銹鋼裝飾線條的施工要注意什么?

    來源:http://www.shjskw.com/ 瀏覽:發表時間:2023-06-08
    不銹鋼裝飾條在居家或是一些公共場所裝飾裝修的時候,通常會用到了,對于有接縫的地方,是怎么處理的呢?不銹鋼裝飾條接縫、接口處理是有一定技巧的,不然處理不好,會影響到美觀,而且還不結實,容易脫落等,影響到今后的正常使用。將不銹鋼裝飾條施工的工藝注意到了,能保證施工更完美。
    Stainless steel decorative strips are usually used for home or public decoration. What is the treatment for areas with seams? There are certain skills in handling the joints and interfaces of stainless steel decorative strips. Otherwise, poor handling will affect the appearance, and it is not sturdy and easy to fall off, which will affect the normal use in the future. Attention has been paid to the construction process of stainless steel decorative strips, which can ensure a more perfect construction.
    不銹鋼金屬裝飾施工工藝:
    Stainless steel metal decoration construction process:
    (1)裝架基層骨架的安裝,其安裝工藝參照木龍骨或輕鋼龍骨的施工工藝,重復檢查垂直度和平整度。
    (1) The installation process of the base frame of the installation frame shall refer to the construction process of wooden or light steel keel, and the verticality and flatness shall be repeatedly checked.

    聊城鋁合金電梯門套
    (2)封底板底板釘封,二般采用5一12mm膠合板,施工方法要求和普通木質罩面板的施工工藝是一樣的。但當龍骨是輕鋼龍骨或角鋼龍骨時,要先用電鉆鉆孔,再用自攻螺絲將底板固定在龍骨上,并且螺絲頭不能高出底板表面。
    (2) The bottom plate of the sealing board is nailed and sealed, usually using 5-12mm plywood. The construction method requirements are the same as the construction process of ordinary wooden cover panels. However, when the keel is a light steel keel or an angle steel keel, first use an electric drill to drill holes, and then use Self-tapping screw to fix the bottom plate on the keel, and the screw head cannot be higher than the surface of the bottom plate.
    (3)不銹鋼板安裝前要根據設計尺寸及造型在加工廠里加工好。當有底板時,分別在底板和不銹鋼板背面涂刷膠,將預先加工好的不銹鋼板粘貼在底面上;當無底板時,將預先加工好的不銹鋼板用不銹鋼螺釘固定在輕鋼龍骨上或直接焊接在龍骨上。
    (3) Before installing the stainless steel plate, it should be processed in the processing factory according to the design size and shape. When there is a bottom plate, apply universal adhesive to the back of the bottom plate and stainless steel plate respectively, and stick the pre processed stainless steel plate onto the bottom surface; When there is no bottom plate, fix the pre processed stainless steel plate to the light steel keel with stainless steel screws or directly weld it to the keel.
    (4)收邊收邊處理,在不銹鋼板之間接口處或陰角、陽角處采用填灌密封膠、壓不銹鋼槽條等方法收邊裝飾處理。
    (4) Edge trimming and trimming treatment, using methods such as filling sealant and pressing stainless steel groove strips at the interface between stainless steel plates or at the internal and external corners for edge trimming and decoration.
    不銹鋼裝飾條隨著人們需求的不斷增多,使用也越來越多了,但在具體施工的過程中,這里面應該提起大家注意的地方并不算少。關于不銹鋼裝飾條接縫這個問題就是很常見的,接縫處理好了,銜接緊密,美觀而大方,而且還特別好用,可讓不銹鋼裝飾條長時間發揮良好的作用。
    With the increasing demand from people, stainless steel decorative strips are also being used more and more. However, in the specific construction process, there are not few areas that should be noted. The problem of stainless steel decorative strip joints is very common. The joints are well processed, tightly connected, beautiful and elegant, and also very easy to use, allowing the stainless steel decorative strip to play a good role for a long time.
    国产精品久久久久久无码专区,国内精品久久毛片一区二区,JIZZJIZZ国产精品久久,国内精品久久久久久久97牛牛
  • <menu id="weoww"></menu>
  • <dd id="weoww"><optgroup id="weoww"></optgroup></dd>
    <menu id="weoww"></menu>
    <menu id="weoww"></menu>